Spark horizon reads incorrectly

[Twesty]

What is likely to be the main reason my DJI Spark does not show a true AH on the display the horizon is just slightly off level? Any help and corrective action needed would be welcome.

 

[nilanjan118]

That's because of the roll axis offset of the gimbal which can be adjusted inside gimbal settings. Please refer to the screenshots below.

 

[pmshop]

That's because of the roll axis offset of the gimbal which can be adjusted inside gimbal settings. Please refer to the screenshots below.

View attachment 10546

View attachment 10547

View attachment 10548

No, not gimbal horizon, Artificial Horizon (AH)
The "ball" in the lower left that tells craft attitude.

That would be an IMU re-calibration.
But if it is off by a tiny bit, I would let it go.
Off by 3° or more, then sure, re-calibrate

 

[Spark 317]

Wind tilting the Spark could show a tilt in the attitude indicator, but the camera view may look level thanks to the gimbal.

If the view is level, but not the indicator, it's probably working ok.

Just a thought. ?