Recent content by Fantomas

Here's the updated list from everything I've gathered so far... 1- Power Up the Spark & the Controller (wait for the green light) 2- Connect the Phone to the Controller 3- Start DJI GO app 4- Press "Go Fly" 5- Wait a few seconds (App needs to tell aircraft to remove restrictions) 6- Make sure...

I want to add a step to that list (don't know if it's really needed. I'll test it later) 1- Power Up the Spark & the Controller (wait for the green light) 2- Connect the Phone to the Controller 3- Start DJI GO app 4- Press "Go Fly" 5- Disconnect the Phone from the Controller 6- Connect the...

OK, so the right sequences are now: 1- Power Up the Spark & the Controller (wait for the green light) 2- Connect the Phone to the Controller 3- Start DJI GO app 4- Disconnect the Phone from the Controller 5- Connect the Goggles 6- Go Fly and Hope for the best :) Is that better? Why make...

Thanks for the info. I will give it a try. Just to make sure, I start the spark and the end of the procedures, is that correct? What do you mean by "You didn't say what you were using" (I have the latest firmware on everything: DJI GO, Spark, Controller, Goggles..at least as of last Sunday)

Are you telling me that : 1- I have to start DJI GO app 2- Connect my Phone to the Controller (don't know why I have to do this) 3- Disconnect my Phone from the Controller 4- Connect the Goggles 5- Start the Spark and Go Fly In that EXACT order? And do I need to do that between every flight...

Please tell me this isn't true! I cannot fly over 50M with my Spark when I use the Goggles. I get a "Maximum Limit" warning and cannot go any further! You must be kidding me!!! No issue when flying with the remote. Logged out of DJI Go, Logged back in...no change I removed DJI Go, Cleared the...

To expensive and TOO big. :-( BTW, I tested my Spark with a Nvidia Shield and an Headplay goggles connected using HDMI and the video is much better than using the DJI Googles. DJI should be able to do something about that.

The DJI Goggles is not connected thru WiFi to the DJI Spark, it's connected using an OTG-USB cable. So we should be able to get something better that 720p...

There is no HD options on the DJI Goggles for the Spark. :( DJI Goggles are 1920x1080 per eye BUT we can only get 720p when connected to the DJI Spark. At 720p the viewing experience is less than optimal. Everything looks a bit blurry. I can get a better resolution display using my old Headplay...

Here's the real deal for the Spark: RTH Triggered ------------------- < 3m -> Land > 3m but < 20m with "RTH at Current Altitude" option: - Disabled(default) -> Land - Enabled -> Raise at 2.5m (if needed), then RTH > 20m Height < Failsafe Altitude -> Raise at Failsafe Altitude then...