Hi All,
Had my drone a few months now n something has to be wrong with it but i don’t know what?
I fly with conteoller and an OTG cable attached to either my ipad or iphone.
I’ll set you through the motion of wjat happens EVERYTIME.
I go up in the air to around 80-100 metres and im in the middle of a field with other fields and a land fill site nearby. Theres no obvious signs of interfearance (like electeicity pylons etc). Yes there are lots of houses nearby.... but my brother flys his spark feom his back garden with plenty of houses around and his has worked perfectly fine.
So i put it into sport mode and fly it away from me and first of all..... the footage is very jittery on my phone whereby i can see a car driving round the road then the footage will freeze for a few seconds then reaume again, and when i pan up and down with the camera gimbal the footage for a few seconds is very grainy and distorted (almost pixilated) then its becomes More clearer as if the picture de-pixalates itself Then it will be fine for like 15 seconds or so before goinf very grainy and jittery again .... then clear again.
Now thats my first issue....
My second issue is this....
Everytime without fail (i dont go very far from Myself in terms of distance “so yes.... i can still see in sight” the picture on my phone which the drone is seeing flashes black and white then goes back colour again and it says a few things such as this.....
* Exit ATTI mode
* Exit GPS
* Connection Lost
I can stil regain controll and bring it back to me but it does this and ive NEVER been able to properly fly the dam thing.
It also memtions something about an IMU or CPU which comes up in yellow.
Ive read it can be down the compass but i already did a compass calibration as it asled me to ..... but again in addition to the other stuff above it says this in yellow highlignted box alert!
There is no big interference as its just a lod of fields and houses n that.
I have also tried flying in 2.4ghz mode and 5.8ghz auto cannel bit both are exactly the same.
I’ve given up because i dont know what else to do now? I cant trust the drone enough to fly it a good distance as i guarantee it will loose connection and show all the above flashing on the screen.
Miracously the closer i bring the deone to me the clearer the picture : video feed becomes and i dont have any of the above warning alerts flashing at me!
And yes the atennas are
Facing in their correct position too!
I wish someone could just look at it for me and tell me what i need to do.
Is it possible to reset the drone completely and would this help?
I dont know anything about the log files that i hear people go on about! Im
A newbie to this and i just want to be able to fly it properly but i cant! It actually puts me off flying it and after not being able to rsolve the issue i dont know what to do???
Had my drone a few months now n something has to be wrong with it but i don’t know what?
I fly with conteoller and an OTG cable attached to either my ipad or iphone.
I’ll set you through the motion of wjat happens EVERYTIME.
I go up in the air to around 80-100 metres and im in the middle of a field with other fields and a land fill site nearby. Theres no obvious signs of interfearance (like electeicity pylons etc). Yes there are lots of houses nearby.... but my brother flys his spark feom his back garden with plenty of houses around and his has worked perfectly fine.
So i put it into sport mode and fly it away from me and first of all..... the footage is very jittery on my phone whereby i can see a car driving round the road then the footage will freeze for a few seconds then reaume again, and when i pan up and down with the camera gimbal the footage for a few seconds is very grainy and distorted (almost pixilated) then its becomes More clearer as if the picture de-pixalates itself Then it will be fine for like 15 seconds or so before goinf very grainy and jittery again .... then clear again.
Now thats my first issue....
My second issue is this....
Everytime without fail (i dont go very far from Myself in terms of distance “so yes.... i can still see in sight” the picture on my phone which the drone is seeing flashes black and white then goes back colour again and it says a few things such as this.....
* Exit ATTI mode
* Exit GPS
* Connection Lost
I can stil regain controll and bring it back to me but it does this and ive NEVER been able to properly fly the dam thing.
It also memtions something about an IMU or CPU which comes up in yellow.
Ive read it can be down the compass but i already did a compass calibration as it asled me to ..... but again in addition to the other stuff above it says this in yellow highlignted box alert!
There is no big interference as its just a lod of fields and houses n that.
I have also tried flying in 2.4ghz mode and 5.8ghz auto cannel bit both are exactly the same.
I’ve given up because i dont know what else to do now? I cant trust the drone enough to fly it a good distance as i guarantee it will loose connection and show all the above flashing on the screen.
Miracously the closer i bring the deone to me the clearer the picture : video feed becomes and i dont have any of the above warning alerts flashing at me!
And yes the atennas are
Facing in their correct position too!
I wish someone could just look at it for me and tell me what i need to do.
Is it possible to reset the drone completely and would this help?
I dont know anything about the log files that i hear people go on about! Im
A newbie to this and i just want to be able to fly it properly but i cant! It actually puts me off flying it and after not being able to rsolve the issue i dont know what to do???