MOTOR BROKE OFF PLEASE HELP!

[StringtigeR]

So I crashed my spark the motor broke off was able to fix the body with plastic weld looks as good as new, but the motor wires broke off cant tell where to solder them back, i tried different combinations this are the 3 wires coming from the heart of the spark not from the ESC board, after so many tries my led sparked and fried so i ordered a new ESC board nd am going to need to know how to solder everything from the 3 wires coming from the spark as well as the red/black and white wires coming from the motor, anyone have any ideas how to wire them or schematic of how to tell what wires come from the spark to the motor area, they are all black altho one looks like it may have a very faint white streak in it.

 

[Spark 317]

Would it be possible for you to pop the opposite (diagonal) motor apart and see how it is wired?

 

[AeroMirage]

Spark 317 nailed it.
You are going to have to look at another.
Front one on the other side as it would rotate the same direction.

 

[msinger]

This photo shows most of the wires:



You'll just need to figure out the position for the two solid black wires.

 

[StringtigeR]

ok i can do that, my main concern was the 3 black wires like i say there is one that looks like it may have a white stripe in it, any ideas?

 

[msinger]

See the photo above. The black wire on the left has a white stripe.