3DR SiteScan EE - Works perfectly and is FREE

[Oyibo VFX]

 

[Haggi]

Too bad its only for IOS devices..

 

[webvan]

Thanks for the demo. I've been running some Pix4D missions and the results are pretty amazing. Have you used it as well ? If yes how would you compare the solutions ?

 

[Oyibo VFX]

Pix4D is amazing and for the Spark better. SiteScan is a different ball game.
If you do crosshatch and circular scans, Pix4D is perfect. Vertical scans, I prefer SiteScan

 

[Haggi]

I'm also into this, obviously Spark has limited flight-time and not the best camera for mapping/ortho.
Android here, Drone Harmony and Bimostitch are my tools.
Main purpose for me, is to "learn" the basics. Would be so much easier when upgrading to Mavic.

"Mapping" with Sparky

 

[Oyibo VFX]

Just make sure your overlap is enough (minimal 75%) and 1.2pix/cm. That's what I use

 

[Haggi]

Just make sure your overlap is enough (minimal 75%) and 1.2pix/cm. That's what I use

Thanks for the valuable info!
I cheated big time..
To keep the flighttime in 10 min range, I set the Spark to take pictures without stopping and 20% overlap.
I later found out DH will allow batt swap and continue plan!
Do you recommend 2 sec interval or software auto interval?
If >99 wp's, Spark will stop midair for uploading rest of flight plan.

 

[Oyibo VFX]

Most programs will work with multiple batteries.
The amount of pictures depends most on your speed and elevation.
If you fly below, lets say 50 meters, 2 secs is good. If you fly higher, 3 or 4 is enough
But save your efforts for the Mavic Pro... Much more capable

 

[Haggi]

Thank you, sir!

Will make another try soon