Compass error. Long storage.
- Thread starter Aksa_1989
- Start date
Hello from the Hoosier Heartland, Aksa_1989.
I have read a few threads in the past concerning this problem.
From what I have read, this item fixed the problem.
CFixer
Try the compass calibration first to see if that corrects the problem before purchasing something.
Welcome to the Forum. ?
I have read a few threads in the past concerning this problem.
From what I have read, this item fixed the problem.
CFixer
Try the compass calibration first to see if that corrects the problem before purchasing something.
Welcome to the Forum. ?
Last edited:
Thomas Poland
Active Member
- Join
- Jul 9, 2019
- Messages
- 34
- Age
- 38
maybe I will not shine intelligence.
, but sometimes the best way is to restore the initial settings. This is one option. drugs, as a colleague wrote, it should be re-calibration of all sensors. You can also choose in DJI asistans2 options for uploading software for Spark. start from two versions back. after each data entry, Spark will probably want to make the latest update. if so, after all this, calibrate From scratch. I think this will be the result. Be sure to avoid interference during calibration that may interfere with correct calibration. I have shown a compass error three times. I calibrated it anew away from the buildings. and it works great. let me know what you did. Take care. successful flights.
MeadowSpark Lemon
Member
- Join
- Sep 15, 2018
- Messages
- 17
- Age
- 106
You need a new battery.
I'll bet if you look a your logs in AirData under power then cell graphs you'll see that just about every compass error has a downward voltage spike in one or more cells, at the same time.
Just an observation of mine made after my friends Spark spent the night in the tree. His would only throw errors with that one battery.
Good Luck
I'll bet if you look a your logs in AirData under power then cell graphs you'll see that just about every compass error has a downward voltage spike in one or more cells, at the same time.
Just an observation of mine made after my friends Spark spent the night in the tree. His would only throw errors with that one battery.
Good Luck
When an update comes out, the Go4 app will let you know.
It's been awhile since DJI had any firmware updates for the Spark.
Lately it's been the Fly Safe Database updating from time to time.
I've never hooked the Spark to the computer, I used the home WiFi to update anything.
Thomas Poland
Active Member
- Join
- Jul 9, 2019
- Messages
- 34
- Age
- 38
Mam teraz trochę kłopotów. DJI go4 pokazuje mi, że mogę zaktualizować aplikację, nawet jeśli uczyniłoby to symulator Sparka lepszym. tylko tam, gdzie go zaktualizować, jeśli wiadomość pokazuje tylko informacje o aktualizacji, przyciski „ok” i „nie pokazuj więcej”
Thanks for the advice, friend. I calibrated the compass, it did not help. I think to buy this device - cfixer
Cool advice. Tomorrow I'll do it and let you know about the result.maybe I will not shine intelligence.
Thomas Poland
Active Member
- Join
- Jul 9, 2019
- Messages
- 34
- Age
- 38
My compass was magnetized(so said in the service center). I used a special device - cfixer and the problem disappeared. thank
Glad to hear you are up and flying again.
I thought about purchasing a Cfixer just in case I may need it in the future.
They are around $75.
I checked the Amazon link and it appears to be sold out. The other links too.?
Are all 3 batteries the same age? Few years old? Did they get charged and hold the charge. You need good power to update settings and updates. For the year and half was it stored flat or on it's side in your case?
Similar threads
