Everyone,
Took my Spark on a flight this morning to test some settings. After landing, my CrystalSky froze. I held down the power until it turned off. Now, it is dead. No response. Battery is fully charged & seated right. No funny noises or anything. This is the 5-6 time I have used it, having the DJI Go 4 app lock up twice on it the day before but after closing the app, it was fine. The screen itself was not frozen. Searching Google produced noting that helped.
The suggestions I found were let it sit with no battery for 2-3 hours & try again, hold power for 60 seconds, hold power for 10 seconds & then release & press again. All with no results.
I only recently go into flying drones & have had some horrible luck! Just as I got all the stuff squared away with my Spark & getting the CrystalSky mounted to my controller, now this happens.
Took my Spark on a flight this morning to test some settings. After landing, my CrystalSky froze. I held down the power until it turned off. Now, it is dead. No response. Battery is fully charged & seated right. No funny noises or anything. This is the 5-6 time I have used it, having the DJI Go 4 app lock up twice on it the day before but after closing the app, it was fine. The screen itself was not frozen. Searching Google produced noting that helped.
The suggestions I found were let it sit with no battery for 2-3 hours & try again, hold power for 60 seconds, hold power for 10 seconds & then release & press again. All with no results.
I only recently go into flying drones & have had some horrible luck! Just as I got all the stuff squared away with my Spark & getting the CrystalSky mounted to my controller, now this happens.
