- Join
- Sep 4, 2018
- Messages
- 17
- Age
- 55
Need help
- Thread starter Larry Bennett
- Start date
Buddy411
Well-Known Member
- Join
- Jul 2, 2017
- Messages
- 209
- Age
- 54
Hey and welcome... ATTI mode or attitude mode happens when the Spark loses GPS positioning. It will hold it's altitude but drift around in the wind. If this happens, you should immediately raise the Spark above all surrounding obstacles and try to regain GPS or land it once you get control.
If this keeps happening in different areas you fly from you may need service.
If this keeps happening in different areas you fly from you may need service.
Always make sure you have at least 10 satellite before taking off otherwise you might end up in ATTI mode. If you have flown other drones which don’t have GPS, you will probably find It is no problem, but if you’ve never flown a drone like that, you may find its a little scary at first.
Always check your IMU and compass for interference by checking the sensors every time before you fly . If your sensors show a lot of interference, move to another location, or fly another day .
Always check your IMU and compass for interference by checking the sensors every time before you fly . If your sensors show a lot of interference, move to another location, or fly another day .
- Join
- Sep 4, 2018
- Messages
- 17
- Age
- 55
i think you misunderstood the icons and values on the screen. 5.8 refers to active WiFi frequency - 2.4 or 5.8 GHz (yellow box on the image) and the number of locked satellites is little more to the left (blue box on the image).
Read all about "ATTI MODE" and be very aware of what causes this,, it leads to a potential drone fly away situation!!!! lost drone....
Similar threads
