Be aware that many OTG cables' connector ends are not interchangeable even if they are both the same type. If you see that your remote is charging your phone, simply swap the connector ends of the cable. Most of the time this will correct the issue and give you the connection you want. I marked the end of my OTG cable that needs to be plugged into the phone.watch out with direct USB micro to USB C "OTG" cables . I bought two from different supplyers and they didn't work. Phone was charging RC ( blinking leds on RC) and not vice versa.
The only which works are a usb micro to USB A fem OTG combined with a USB C to USB A male. RC is charging phone
Thanks for the reHello Farkle. There is no reason it shouldn't work. Although I use an iPad mini4 I have used my Galaxy S10 with an OTG cable and it worked just fine. Don't forget to turn off WiFi or just put it in Airplane mode.
Thanks for the information.You shouldn't have any issue. I have a S10+ and use OTG cable that's micro USB- USB C . Sometimes it will show a charge for a split second but goes away when I open the DJI app.
Thanks for your response.Thanks for the re
Thanks for the information.
watch out with direct USB micro to USB C "OTG" cables . I bought two from different supplyers and they didn't work. Phone was charging RC ( blinking leds on RC) and not vice versa.
The only which works are a usb micro to USB A fem OTG combined with a USB C to USB A male. RC is charging phone
We use essential cookies to make this site work, and optional cookies to enhance your experience.