Hi everyone. I've been having some short range issues with my spark loosing signal at roughly 150m distance (not height). This in a beach where there are no obstructions, with RC, iPhone 5s and updated firmware.
After researching a bit it seems that one explanation for this is the fact that 5.8GHz has a shorter range than 2.4GHz in CE mode (where I am). One suggestion seems to be to select the Custom and then picking a wifi channel in the 2.4GHz range. The problem is that in this case the drone won't be adapting to interference and will stick to the same channel now matter what. I wonder, is there a way to have something like "Auto but only 2.4"?
Thank you for your help
After researching a bit it seems that one explanation for this is the fact that 5.8GHz has a shorter range than 2.4GHz in CE mode (where I am). One suggestion seems to be to select the Custom and then picking a wifi channel in the 2.4GHz range. The problem is that in this case the drone won't be adapting to interference and will stick to the same channel now matter what. I wonder, is there a way to have something like "Auto but only 2.4"?
Thank you for your help