Recent content by lannes

Very capable AC, but if you want the better camera, it's always better to go with the larger sensor therefore the M2P instead of the M2Z They are expensive though. Maybe a secondhand P4P might be another option

Don't you just set it to AFC (auto focus continuous) and auto exposure

Not much difference, for me it's the 60% quieter that is main benefit, but if you want to save money just get the pro it's the same. Refurbished...

I'd go for a Mavic Pro

I'd look for a MPP

Have you tried with a new battery ? I can only think there is a corrosion issue from water damage Have you tried using electrical contact cleaner on the IC board and connectors

What app are you running, the image you added is not DJI Go4 ?

When you connect to the spark do you get the usb connect/disconnect tone cycling until you disconnect it ? When you get the "unknown device" message after plugging in the Spark, right click the message and select "troubleshoot device", see if that does anything. Try this tutorial...

Does the spark actually connect to the remote controller ? Have you charged the battery, does it show a charge when you test it by pressing the power once. ? Did you remember the the button sequence for power on "it's press, press and hold until the light cycle across" I assuming you have the...

I use my Skyzone 02x goggles in HDMI mode and cable connected to the Crystal Sky hdmi out running DJI Go4 I also fly my spark with the Epson BT-300 glasses which is a better experience than the FPV goggles, but they're more expensive than Fatsharks

Are you using the right version of DJI Assistant 2 It's at the bottom of the downloads page https://www.dji.com/au/downloads/products/spark Try also disabling "driver signature enforcement" in Windows 10, DJI never had it's drivers authorised so they are sometimes blocked by Microsoft

Yagi's also make a difference

Not sure if a spark could carry one, I suspect it might be able to carry about 150 grams But I have used a lume cube 1500 lumens on a Mavic Pro https://lumecube.com/collections/drone-products?gclid=CjwKCAiA__HvBRACEiwAbViuUziAml9XfcDjyWjWjktRBXPAKRTsehG-G4y9axjELY4laklcizmBTBoC-SEQAvD_BwE for...

An Inspire could do that damage it weights about 8lbs

If your using the controller and have paired it to the AC, all you have to do is link you phone to the RC wi-fi ssid, if you look at the available networks on the phone you should see something like "SparkrcXXXX" that is what you need to connect the phone to, the password is located in the...