Seems so.
3
batteries,
- 3 LEDs
- 2 LEDs
- 2 LEDs
Insert 1, starts charging -> OK
Insert 2, 1 stops, 2 starts and 1 starts again -> OK
Insert 3, 1 & 2 stops, 3 starts and 2 starts, 1 remain off -> Not same
Reinsert 1, 2 & 3 continue charging, 1 not -> Not same
Take out 3 and it start charging 1 and continue 2 -> OK
Reinsert 3 and it stop charging 1 and charge 2 & 3 -> Not same
Seems the clever idea to have a
battery fully charged as soon as possible is gone.
There is a limitation in the charger that with 3
batteries inserted it takes more time. 1 or 2
batteries can be charged at full speed.
I don't see a real benefit doing this new way.
UPDATE:
After half an hour, the third
battery started to charge too. So now all 3 are charging. Seems to start when all reached the same
battery level. At the end, I should get all
battery finish charging at same time.
So if you need urgently a
battery charged, put up to 2 with the highest remaining charge possible.
If you are not in hurry, you can plug the 3, they will be all charged at the end.