Connecting Fly More Combo to New Phone

[Antonius138]

So I recently picked up a Google Pixel 2 XL and installed the DJI Go 4 app. (I had been flying my spark with my old iPhone 6). When I start the app and login, it wants me to go through the activation process. I power on the drone, power on the RC, select connect to aircraft, select aircraft combo and go through the wizard. I get to step 3 and connect to the WiFi but it does not light up the next button. The controller and drone connect with each other and I have green lights, but I am unable to get past the step 3 which is to connect to the RC WiFi (although it is connected). I have tried to reset the WiFi on the RC by holding power for 9 seconds which does reset the WiFi and I can connect to the RC from my phone, but not to the aircraft.

I am using the most current firmware and the 4.1.22 version of the DJI Go App.

Any ideas?

Thanks,

Anthony

 

[Tommy89]

Hi Anthony,

Did you get a solution to this?
I too am using a Google pixel 2xl and I can't connect at all!
Any help would be grrat

 

[Jlankford]

That is how it’s supposed to work. Phone connects to remote, remote connects to aircraft. Once everything is connected you should just have to hit go fly in the dji go app.

 

[Djhnsn]

Have you tried connecting to the rc wifi before you open the DJI app?

 

[wrxg33k]

Try putting your phone in airplane mode. That's the only way I could add my spark on a Galaxy s9

 

[Willard]

Try to connect to the wifi of the RC with the phone and make sure there is not a dialogue box asking something like "this network has no internet connectivity, are you sure you wish to stay connected to this network?" Agree to this and then launch the DJI app - will work then.

 

[Victor Morgret]

Make sure you put your device into airplane mode my pixel will not connect unless it's in airplane mode