I've been having an issue of video dropouts and pixilation and I'm working through various troubleshooting items to determine if it is the phone or the drone. The reason I say this is that my first unit had an unfortunate high-altitude encounter with a tree so it was sent out for repair/replace. Unit was solid and fine. What came back was another unit and since then I'll get these lag/pixelation issues. One possibility is that antenna on drone is damaged.
So... I've been watching the WiFi screen while flying as well as at rest and see quite a lot of variation of signal strength. My question: does the blue bar indicate the signal strength of the received signal from the drone to the RC? How do I read that WiFi screen of red bars and blue bar? (I'm using RC without OTG cable). I would expect that only a few feet away I would be getting full signal (80dBm) but I'll see that blue bar mostly down in the weeds with the other channel signals.
So... I've been watching the WiFi screen while flying as well as at rest and see quite a lot of variation of signal strength. My question: does the blue bar indicate the signal strength of the received signal from the drone to the RC? How do I read that WiFi screen of red bars and blue bar? (I'm using RC without OTG cable). I would expect that only a few feet away I would be getting full signal (80dBm) but I'll see that blue bar mostly down in the weeds with the other channel signals.