FAA identification

[lowoctane]

Need a place to buy letters/numbers for my Spark. Thx in advance!

 

[msinger]

I sell inexpensive FAA labels here.

 

[Mike Fischer]

I just used my label maker to make a small label with my FAA number and phone number.

 

[lowoctane]

I just used my label maker to make a small label with my FAA number and phone number.

Ok. I envisioned the number emblazoned across the fuselage!

 

[mikep2323]

For my phantom 3 I went to Wal-Mart. They had sticker number packs for like 99 cents.

 

[Spark 317]

Ok. I envisioned the number emblazoned across the fuselage!

A Sharpie marker will work as well.

You don't even have to write on the exterior of the drone if you want to keep it clean.

Inside the battery compartment will suffice per the FAA.

 

[Ricky Martin]

A Sharpie marker will work as well.

You don't even have to write on the exterior of the drone if you want to keep it clean.

Inside the battery compartment will suffice per the FAA.

My only problem with that is if you ever sell it you have to remove it.

 

[Sparkbart]

I've used de-natured alcohol to remove sharpie pen marks on stuff before. Might work...

My only problem with that is if you ever sell it you have to remove it.

 

[Sparky Ron]

I purchased a skin from decal girl.com and had them put my id on the top body skin. It looks real professional. You can put the id on the battery skin, the prop skins, anywhere you want. Cost $21 for a custom skin, many choices of colors. If you take them off, they leave no residue. Ron

 

[clouseau]

You can make your own, and it’s removable and cheap.

https://www.amazon.com/dp/B005X9VZ70/ref=cm_sw_r_sms_c_api_dZazAbMPNTTHE​

 

[lowoctane]

Ordered the 1/8" decals. Once I get them, I'll post up some pictures...

 

[NewYorkJack]

My only problem with that is if you ever sell it you have to remove it.

Little unknown cool trick. Write over any Sharpie writing with a dry-erase marker, wait a minute and you'll be able to wipe it off dry with just a paper towel.

 

[Dartheyeball]

I have a vinyl plotter if anyone needs my service.

 

[lowoctane]

I have a vinyl plotter if anyone needs my service.

Huh! Have some 1/8" backless decals coming...

 

[idbl_fanatic]

You can put the id on the battery skin, the prop skins, anywhere you want.

Prop skins? How does that effect the balance/flight?

 

[msinger]

Prop skins?

You don't want to attach anything to the props. It will affect the balance.

 

[idbl_fanatic]

You don't want to attach anything to the props. It will affect the balance.

Right, that was my point

 

[Heckmaniac]

Small font label maker - attached on top all the way back. Looks like part of the drone.