Gesture mode

[droneflyersg]

I tried turning on gesture mode from the app but the switch keeps turning it back off. I don't know why this is happening

 

[Bubbles!!!]

More details about the situation?
Most likely it's because it doesn't have enough of a GPS signal to do so.
For details, when, where, weather conditions, surroundings, preflight, etc...

 

[Djr01974]

Did you do this

How to use Palm Launch:

1. Hold the Spark at arm’s length from your face
2. Make sure the camera is facing you
3. Double click the power button on the rear of the aircraft
4. When the front lights turn green release the aircraft and it will take off
5. Once your drone is in flight raise your hand flat to face the drone and hold it there until the lights go green again
6. Move your palm around to move the

 

[droneflyersg]

Cant enable advanced gesture mode... when i slide the slider... it slides back into place

 

[Lastrexking]

Are you using an otg cable?

 

[droneflyersg]

Yes

 

[droneflyersg]

Are you using an otg cable?

Yes

 

[23jboy]

Yes

Try without? I've no problem with it, I'm not using otg

 

[droneflyersg]

Try without? I've no problem with it, I'm not using otg

I'll try.. I'll update

 

[nutsnbolts]

I'll try.. I'll update

You can't use an OTG cable as of now with the latest version of the DGI Go 4 app. 4.1.18 or 4.1.22 to change settings along with all the OTG related issues with telemetry not showing up.

Connect directly via WIFi. That should solve it.