IMU Calibration will not go past 2

[DingoDen]

Hi
Have had my spark for a week and tried to do a IMU Calibration (after all updates have been done)

press start position 1 in a few seconds rotate to position 2 and it just sits there with lights blinking. switched off after about two minuets. should I have left it longer?

Thanks

 

[msinger]

Double check that you have the Spark in the correct position. Here's a video showing how the IMU calibration should be done:

 

[DingoDen]

Thank you the photos on the app are not clear

 

[DingoDen]

Worked 100% thanks

 

[graywoulf]

Mine took three tries to get the job done the first time. I tried the calibration outside on the porch railing the first two times and the one that worked was indoors on a table. One of those things that make me go hmmm.

 

[jk_images]

sometimes the RC needs to be at least 2m away from the drone..

 

[Blind Rookie]

Double check that you have the Spark in the correct position. Here's a video showing how the IMU calibration should be done:

Thanks, that's a big help!