I will be doing some kayaking and canoeing this summer when we go camping and would like to try taking off and landing, especially from a kayak.
On land, I usually takeoff from my hand (double tap) and land on my hand but on a kayak this could become tricky as it will likely be drifting even with little wind, and space to manoeuvre is limited. Taking off should not be a problem, but landing most likely will. I am looking for suggestions from anyone who has done this sort of thing before. I am aware that the kayak or canoe will likely not be at the original home point and getting back to it would be next to impossible on water so I will probably be using AutoPilot since it has the ability to use dynamic home point. I will also make sure I start the landing process with lots of battery left (40%).
Anyone who has done this before, I welcome your tips or suggestions.
Chris
On land, I usually takeoff from my hand (double tap) and land on my hand but on a kayak this could become tricky as it will likely be drifting even with little wind, and space to manoeuvre is limited. Taking off should not be a problem, but landing most likely will. I am looking for suggestions from anyone who has done this sort of thing before. I am aware that the kayak or canoe will likely not be at the original home point and getting back to it would be next to impossible on water so I will probably be using AutoPilot since it has the ability to use dynamic home point. I will also make sure I start the landing process with lots of battery left (40%).
Anyone who has done this before, I welcome your tips or suggestions.
Chris