Okay. Now that my DJI Go 4 app is upgraded to 4.2.12, I have 2 experiences to report back.
Loss connections
I was flying tonight. All was well with the first flight. But upon the 2nd flight (2nd
battery - which was still around 60%), the Spark was only 126 meters from Home, it lost signal. By that, I meant the drone loss connection to the RC, the video froze and App stopped working. Luckily, the drone automatically RTH, it established connection with the RC and there were video, but I noted that the camera was tilted one side on its way back.
I tried a 3rd
battery and this time, the Spark was only within 10 meters away from Home, but was 120 meters high. Same thing, loss connection with the RC, no video, App stopped working. RTH was good (whew!), established connection on landing and camera was tilted.
By this time, I stop flying and came back indoor. The camera and gimble seem fine.
I'm at a loss what happen, had anyone experience this issue with v4.2.12?
Please note my mobile phone is connected to the RC via wifi.I don't have a OTG cable yet to try.
Reset back to CE
On V4.2.8, every time I get into the DJI Go 4 app, it asked me whether I want to change the WLAN setting (as it detects I am in a CE country, but the app was previously set to FCC). I normally typed CANCEL to retain FCC mode. I noticed v4.2.12 had defaulted me to CE and no longer see the WLAN message to set to FCC (I was Floater to set my GPS location to US).
Any experience here from other Spark pilots?