I'm trying to update the firmware using the Assistant. I plugged in the Spark, showed up on the app, selected UPDATE FIRMWARE. Now I see "TRANSMITTING..." and 0%. The lights have been flashing for 10 minutes or more... no increase in the percentage. What's up? Help!
Trying to update firmware!
- Thread starter Rick Morton
- Start date
Ok... what happens is when I first run the Assistant and plug in the Spark... it says "Updating no-fly zone is required. Continue? or Ignore."
If I CONTINUE, the above happens. Just keeps showing Transmitting but the percentage never increases. If I say IGNORE, it takes me to the firmware update, which works. I'm now doing it for all 6 batteries. But still can't get the No-fly update to work. >?????
If I CONTINUE, the above happens. Just keeps showing Transmitting but the percentage never increases. If I say IGNORE, it takes me to the firmware update, which works. I'm now doing it for all 6 batteries. But still can't get the No-fly update to work. >?????
I recently ran into the same issue and just ignored it. You will get that warning once in a while and I continue to ignore it. Maybe it is a bug that will get corrected soon.
I'm trying it again now. Downloads immediately but then just says Transmitting... 0%. My fear is that since it says "updating no-fly zones is REQUIRED'... I'll go out to fly and it won't let me because the database isn't updated. I'll call DJI on Monday.
Florida Drone Supply
Well-Known Member
- Join
- Jul 3, 2017
- Messages
- 242
- Age
- 53
I try same with otg cable in RC. Doesnt work. Then, I remove otg, finde wifi for RC connect and update work. After that, find with android device, without otg cable dron netvork (first, start the spark. Second, hold batery until I here 2 beeps, then you can finde spark wifi again). Now, update go no problem. After this, u must repeat this for all battery.
Similar threads
