DJI Go 4 update - 4.2.4 update on both IOS and Android

John-yyb · Jan 23, 2018

LiamB said:
Thank you, so turn WIFI off pre flight, should i also put phone into aeroplane mode to prevent incoming calls etc or is this not required?

If you turn on airplane mode you disable all tx functions, should result in a better connection with the spark.

But, if you don't enter airplane , you can transmit live video, may not be able to fly as far though

LiamB · Jan 23, 2018

msinger said:
That's a good idea, but it's not required.

Sorry for all the questions but its crossed my mind if this is done will the spark still plot its history on a map post flight incase something goes wrong and i need to track it?

msinger · Jan 23, 2018

LiamB said:
if this is done will the spark still plot its history on a map post flight incase something goes wrong and i need to track it?

Yes.

amir · Jan 23, 2018

Is something wrong here?

Pappy · Jan 23, 2018

Just upgraded to 4.2.4 to check and see if OTG and Offfline Map has been fixed. Sadly this is not the case. It's back to 4.1.15.

Is "mapbox" a new moving map the GO 4 app is moving to?

mildim · Jan 23, 2018

I am still confused

garben · Jan 23, 2018

It appears that the newly released IOS version of DJI Go 4 is working properly with the OTG. I have not seen any weak signal warnings, battery and video transmission data is showing up. It seems to be working!

DJI GO 4 ver. 4.2.4

So far I do not see any new release of the app for Android.

LiamB · Jan 23, 2018

Oh dear, the forum police will be on to you garben! They're hot tonight.

garben · Jan 23, 2018

I just posted the same thing in the software and firmware section of the forum. It looks like this new version in IOS 4.2.4 is working for me with OTG.

I also use android, but I have not tried it yet

craig Dixon · Jan 23, 2018

Need to Know If you guys think I should give OTG a go with the new update and If ND filters are worth It..
Cheers Craig

garben · Jan 23, 2018

Oh, I am kinda new here. Didn’t realize shearing my experiences. Was illegal.

Pappy · Jan 23, 2018

Check telemetry data "H", "D", "V", Satellite, and battery level are all being reported as "N/A".

I'm running 4.2.4 from Android 7.0.

garben · Jan 23, 2018

Are you using Android or IOS. I only got the up date for IOS.

bipbipRichieMX · Jan 23, 2018

Pappy said:
Check telemetry data "H", "D", "V", Satellite, and battery level are all being reported as "N/A".

I'm running 4.2.4 from Android 7.0.

Bummer, I was hoping the OTG issues were fixed with this new version, no love for the android version it seems...

FatherXmas · Jan 23, 2018

Does it completely work or just mostly work like it used to? By that I mean can you assign the buttons and it remembers them, etc.? I'm betting on mostly works, I would think there'd have to be stuff added in the firmware.

leatherneck6017 · Jan 23, 2018

Pappy said:
Check telemetry data "H", "D", "V", Satellite, and battery level are all being reported as "N/A".

I'm running 4.2.4 from Android 7.0.

On the play store it still says 4.1.22, but an updated date of today. You sure you're on 4.2.4 on android?

LiamB · Jan 23, 2018

garben said:
Oh, I am kinda new here. Didn’t realize shearing my experiences. Was illegal.

Ha, people get funny over multiple posts of same thing

Lastrexking · Jan 23, 2018

At least you posted in the right sub forum @garben

iOS DJI Go 4 update

Pappy · Jan 23, 2018

Yep, under "settings" it shows "DJI GO 4 v4.2.4(509-googlePlay)".

From Play Store:

What's New
Added compatibility and features for the Mavic Air:
- Added APAS (Advanced Pilot Assistance Systems).
- Added ActiveTrack with multiple subjects identification.
- Added new Boomerang and Asteroid QuickShots (with v01.00.0100 firmware).
- Upgraded Gesture mode to SmartCapture mode (with v01.00.0100 firmware).
- Enhanced Pano shooting with improved image stitching and
effects (with v01.00.0100
firmware).
- Supported the Mavic Air’s internal storage.
- Fixed bugs and updated certain features.

Version. Updated on
4.2.4. Jan 23, 2018