idbl_fanatic
Well-Known Member
- Join
- Jan 9, 2018
- Messages
- 255
- Age
- 53
Yeah, I, too just went back to 4.1.15, seems that it has better signalGood luck with that. 4.2.12 doesn't do the trick for me. I'll try 4.1.15 probably today at the beach ;-)
Yeah, I, too just went back to 4.1.15, seems that it has better signalGood luck with that. 4.2.12 doesn't do the trick for me. I'll try 4.1.15 probably today at the beach ;-)
HMMMM, that's not very farI tested 4.1.15 at the beach today. 200 meters out...signal gone. But (and that's a big BUT) until then the performance was solid not like my last flight with 4.2.12
Furthest I have been on 4.1.15 is 932m and 121m heightMaybe I was sitting in the wrong spot. There were a few WiFi sources in 2.4 and 5Ghz.
There's a short clip of the sunset today on our FB account. That's what the spark recorded, no color correction or anything ;-)
Security Check Required
Btw. The farthest I ever managed was 492m at a hight of 100m.
Did you get a permission to fly I'm Thailand? I have seen that is mandatory and there are big fines even jail for flying Drones without the permission...Maybe I was sitting in the wrong spot. There were a few WiFi sources in 2.4 and 5Ghz.
There's a short clip of the sunset today on our FB account. That's what the spark recorded, no color correction or anything ;-)
Security Check Required
Btw. The farthest I ever managed was 492m at a hight of 100m.
When will It end ...How long has It been since an update forced us too update the App because when it works Great like on 4.2.8 for me I feel what's the point in doing So?????Version 4.2.14 now
Wait... So you see no benefit to OTG.... Why are you posting in this thread again?When will It end ...How long has It been since an update forced us too update the App because when it works Great like on 4.2.8 for me I feel what's the point in doing So?????
Just wanna fly not test fly another stupid update to see if it's ok...
Otg means nothing to me anyway as 2.4ghz any channel gives good distance to 1000m anyway
Absolutely because when you go to a brand new device and connect to it through Wi-Fi from remote or Otg..the Spark shows all your settings in that app straight away except for your video cache settings you must do like how much gig to store like 2gb or 4gb and record audio with cache but everything else is relayed direct from the sparks firmware and chipset to the App...No need to recalibrate also unless the Spark was to get new firmware or u crash it or get compass warnings...As a rule I always check my sensor readings before take off...Have a question. I am currently using my wife's iphone6 but instead of carrying around two phones I would like to simplify and just use my pixel 2. Can the controller be 'linked" to two separate phone without recalibration? Meaning if I want to use iPhone I can just connect to controller. Or if I want to use the pixel I can use it just by wifi connection? Thanks
Yeah I hear ya but just find on 2.4ghz I get great distance and ok video response to my phone Galaxy A8 or IPhone 6 plus...Wait... So you see no benefit to OTG.... Why are you posting in this thread again?
Then why did the last update .12 actually say OTG for spark support? So now what's the argument?Yeah I hear ya but just find on 2.4ghz I get great distance and ok video response to my phone Galaxy A8 or IPhone 6 plus...
Also I am Ce channels In New Zealand... But yes 5.8ghz is Crap for anything over 200 meters...
2.4ghz is like it should be so if I do long distance 2.4 it is but 5.8 is good for close quarters city environment...
Just my opinion and would be cool if the Spark was truly officially supported for OTG but you can it is not because Litchi say the SDk is not there for it..[emoji20]
Then why did the last update .12 actually say OTG for spark support? So now what's the argument?
Ok all good but as a reseller for Dji they have told us that the Spark Has and never will be supported for OTG it just works when it shouldn't and saying so on 4.2.12 was a mistake and that's why it was pulled promptly from the notes on G play store..Then why did the last update .12 actually say OTG for spark support? So now what's the argument?
We use essential cookies to make this site work, and optional cookies to enhance your experience.