Litchi Limitation

[pmshop]

i just used orbit as an example.
You cannot enter an Orbit Mission without taking off first.
Waypoints, you can take off and start the mission at the same time.

Your menu matches perfectly.

WAIT A MINUTE!
Your mission is on custom heading?
And it is facing 0° (north) at all times flying sideways.
Maybe that is it.

At each waypoint, change the heading slider and line up the nose of the Spark icon with the direction of travel.
Set the proper heading for all 5 waypoints and try again.
Or select AUTO (TNW) in the Hub settings menu

 

[Tafische]

i just used orbit as an example.
You cannot enter an Orbit Mission without taking off first.
Waypoints, you can take off and start the mission at the same time.

Your menu matches perfectly.

WAIT A MINUTE!
Your mission is on custom heading?
And it is facing 0° (north) at all times flying sideways.
Maybe that is it.

At each waypoint, change the heading slider and line up the nose of the Spark icon with the direction of travel.
Set the proper heading for all 5 waypoints and try again.
Or select AUTO (TNW) in the Hub settings menu

Have done it both ways and same results. The little guy seems good about being able to fly at any orientation at the same speed. I did go out again and fly it again with pointed in the forward direction just to be sure one more time.

@pmshop - do you use AirData? If so, can you go into the Power/Volts and Amp section and look at "Flight Specific Full Range Amp Map"? See if at any time during a mission did you go above 6.1A (out of the green). That is what is appearing to be my limiter.

 

[pmshop]

Amp limiting is not the issue:

 

[Tafische]

Amp limiting is not the issue:

Thanks. Well I'm stumped..... Not battery temp because you are warmer.... I am within 5 miles of an airport (heliport), but I can't believe that would be it...although stranger things have happened.

 

[pmshop]

Thanks. Well I'm stumped..... Not battery temp because you are warmer.... I am within 5 miles of an airport (heliport), but I can't believe that would be it...although stranger things have happened.

I am within 5 miles too but not a DJI Fly Safe spot

 

[Blellow]

There is a slider setting in the dji app that controls the speed of the spark. Maybe that setting is causing the problem.

 

[pmshop]

There is a slider setting in the dji app that controls the speed of the spark. Maybe that setting is causing the problem.

??
Where?
I did not know this

 

[Blellow]

It is in remote control settings in the dji app. It is a slider called max flight speed settings.

It is a fun slider to play with because it can be used in conjunction with the other modes like tripod or sport.

 

[pmshop]

It is in remote control settings in the dji app. It is a slider called max flight speed settings.

It is a fun slider to play with because it can be used in conjunction with the other modes like tripod or sport.

I just looked through the menu and did not see it.

 

[Blellow]

Hmmm, sometimes it hides if the menu page is scrolled to far down.

 

[pmshop]

Do a screen shot when you can, highly interested.
But I do not think the DJI GO 4 would interfere with Litchi except with Android systems.

 

[Tafische]

There is a slider setting in the dji app that controls the speed of the spark. Maybe that setting is causing the problem.

Since I can manually fly it much faster in Litchi then I would rule that out.

Signed, Still Stumped

 

[Blellow]

Hope this works.

 

[pmshop]

Hope this works.

You got it!
And this is on a Spark?
Never saw it before but know exactly where it "should" be.
Hmmmm....

Android???

 

[Blellow]

Yes, Android s8 with rc n spark.

 

[Spark 317]

You got it!
And this is on a Spark?
Never saw it before but know exactly where it "should" be.
Hmmmm....

Android???

Here’s mine from the mini4.

 

[pmshop]

There it is!
Yes, the slight differences between iOS and Android.

 

[crumbsPenfold]

All this is very cool!

 

[Chris53825]

Since I can manually fly it much faster in Litchi then I would rule that out.

Signed, Still Stumped

Hoping someone figures this out. I'm having the same issue with the speed limitation.

 

[pmshop]

Hoping someone figures this out. I'm having the same issue with the speed limitation.

Have you updated to Litchi 2.5.1?